Line 6 X2 XDS-95 Stompbox Digital Wireless System

Line 6 X2 XDS-95 Stompbox Digital Wireless System Review

Line 6 X2 XDS-95 Stompbox Digital Wireless System Feature

• 24-bit digital converters capture your most expressive performances
• No companders so your sound is pure without noise or distortion,Frequency response all the way down to 10 Hz for truly thundering lows
• Five simultaneously compatible channels
• TRS 1/4" output for instrument and full-bandwidth or 'tuner out' applications
• Roams freely throughout N. & S. America and is 2009 Compliant

The XDS95 from X2 delivers your tone and performance with the sound and feel of a direct wire connection - all at a price that won't break the bank.

Features include: 24-bit digital converters yielding 117 dB dynamic range to capture your most expressive performances without the use of companders, five simultaneously compatible channels, frequency response all the way down to 10 Hz for truly thundering lows, TRS 1/4" output for instrument and full-bandwidth or 'tuner out' applications, and a five segment LED display (battery status, link status, audio level and channel).

The operating the system is unlike any wireless you've tried before. Simply connect the transmitter to the source via the 1/8" threaded-collar locking connector and the "stomp-box" style receiver to your amplifier, mixer or pedal-board. Then power up making sure the transmitter and receiver are set to the same channel. That's it. You're ready to go! No knobs to adjust and no antennas to loose or break mean you're up and running in approximately the same time it takes to connect a cable.

SYSTEM CONTAINS:

• Digital UHF bodypack transmitter
• Digital UHF 'stomp-box' receiver
• Instrument cable
• Users guide and all necessary batteries

Specifications

• Frequency Response (± .5dB): 10 Hz - 12 kHz
• Audio Dynamic Range: Greater than 117 dB
• Distortion: 0.03% THD
• Compatible Channels: Five
• RF Output Power: 10mw
• Operating Range: 150' line-of-sight (may vary due to local conditions)

XD Series 24-bit Digital Wireless: Wireless for Any Stage
The concept of wireless is irresistible, but the reality is often a series of compromises: altered tone, increased noise and interference leading many potential users to shy away from it.

What if all of those problems just disappeared? What if your wireless sound was identical, or better yet, an improvement over your wired sound? Considering the significant investment you've made in your equipment, this would be a good thing wouldn't it?

The XD Series from X2 offers a variety of wireless solutions you've been waiting for. Designed specifically for music and live sound applications, XD Series wireless systems deliver your tone and performance with the sound and feel of a direct wire connection - all at affordable prices.

This is made possible with digital conversion. At the transmitter, a 24-bit converter captures audio signals at the source with full frequency response and full dynamic range and transmits the digital data to the receiver. The data is then sent to a 24-bit digital-to-analog converter and sent to the output connectors. The first thing you'll notice is that the audio signal is pristine - no noises and no compression. You'll also appreciate that all X2 systems are 2009 Compliant so they're free from FCC/DTV concerns.

X2 offers the XDS95, a portable stompbox system for recording, rehearsing or gigging, or the XDR95, a professionally equipped rack mount system featuring Q-DiversityPLUS™ (think true diversity multiplied by two) with extended range for higher level performances including larger venues. And new for 2008, the XDS-PLUS - a pro stompbox that has many of the XDR features crammed into its metal chassis.

Lastly, X2's products are designed and manufactured in the USA with over 10 years experience producing the finest digital wireless systems available being poured into everything we make. The XDS-95 from X2 delivers your tone and performance with the sound and feel of a direct wire connection. 24-bit digital converters, yielding a 117 dB dynamic range, capture your most expressive performances without the use of companders. Other features include five simultaneously compatible channels, a frequency response all the way down to 10 Hz for truly thundering lows, TRS 1/4" output for instrument and full-bandwidth or tuner out applications, and a five segment LED display. Simply connect the transmitter to the source via the 1/8" threaded-collar locking connector, and the stompbox-style receiver to your amplifier, mixer, or pedal-board. Then power up making sure the transmitter and receiver are set to the same channel. No knobs to adjust and no antennas to loosen or break, mean you're up and running in approximately the same time it takes to connect a cable. Input Impedance - 1.3 M-Ohms Connectors - 1/8 Unbalanced-locking connector Controls - Power On/Off, Channel Select Five Segment LED Display - Power On, Channel, Battery Life, and Audio Level Meter Battery Life - Switching power supply, Up to 12 Hours (9V alkaline) Dimensions - Width 2.4 x Height 4 x Depth 0.8 (6.09x10.16x2.03cm) Weight - 0.25 pounds (with 9V battery installed) XDR1 Receiver Specifications D/A Conversion - 24-bit Delta Sigma, 128 times over sampling Output - 2.12V RMS (Unbalanced - 1.8K Ohm) Connectors - 1/4 Unbalanced stereo output LED Display - Power On, Data Link, Channel, Battery Life, and Audio Level Meter Controls - Power On/Off, Channel/Mode Select Power Requirements - 9V DC 100mA via alkaline battery or optional XAC2 adapter Dimensions - Width 3.078 x Height 4.7 x Depth 1.17 (7.82x11.94x2.97cm) Weight - 0.45 pounds